Your charger's status light may be a bit bright at night time. With Plugchoice, it's possible to change the brightness yourself.
Changing the brightness in the settings
If we've supported your charger, you can find this in the settings.
App
App
Go to Chargers > Settings > Status light brightness.
Web portal
Web portal
Go to Chargers > Settings > Status light brightness.
Currently, it's not possible to set a timer for day/night time. You can only set one brightness level.
Changing the brightness via advanced settings
If the setting is missing from your charger In the web portal, it means we haven't supported it for your charger. It's possible to change the brightness yourself by changing advanced settings.
Via parameters
Possibly, your charger has a parameter setting for this.
To find it, go to Chargers > View > Parameters.
Via commands
If you can't find it in parameters, it's possible there is a command key for it. You have to know the key. Then, go to Chargers > View > Commands and select ChangeConfiguration. Enter the key and its value.
Changing the brightness for Volt Time chargers
Source and Source 2
Web Portal
Go to Charger>Configuration
Find they key called
OEM_LEDBrightnessChange to a value between
1and100
1 is the least bright and 100 is the brightest.
This will change the LED brightness for all LED states.
Local (not recommended, not supported)
Locally log in to your Source or Source 2 charger
Go the
LEDtabScroll to the desired LED state, for instance
IdleChange the RGB values to the desired strengths
Press Save on the bottom of the page